You are here: Home » Product Category » Laboratory Machine » Auto Hematology Analyzer » Portable Clinical Analyzer for Blood Gas and Chemistry Portable Blood Gas Analyzer

Portable Clinical Analyzer for Blood Gas and Chemistry Portable Blood Gas Analyzer

Share to:

Portable Clinical Analyzer for Blood Gas and Chemistry Portable Blood Gas Analyzer

(pO2/pCO2/HCT/pH/K/Na/Cl/Ca/LAC/GLU)
Features
·Multi-specification reagent packs(50 tests/pack-1200 tests/pack): stored at room
temperature for 9 months, valid for up to 45 days on-board.
. Integrated flush solution pack to avoid biological pollution and without waste till used up.
.Automatic sample aspiration and sample needle cleaning, support capillary, arterial blood
syringe, test tube, etc.
.Sample analysis speed ~60s (with Lac/Glu <90s), blood volume for the whole
parameters <170ul.
. Built-in multi-level quality control rules, quality control charts, quality control data,
printable and exportable.
.Support bi-direction LIS, built-in WiFi,4G, and remote maintenance system.
. Built-in 2D barcode scanner and thermal printer, support external USB printer.
·Built-in UPS, optional trolley and external large-capacity UPS.

Availability:

Quantity:



Inquire Add to Basket

Model:
MY-B006A-4

Blood Gas Analyzer Auto Hematology Analyzer Clinical Analytical Equipment Chemistry Hematology Analyzer hematology analyzer Blood Testing Equipment Clinical Analytical Instruments

Product Description

Technical Parameters

FAQ

The three-category fully automatic blood analyzer is a device used to analyze human blood samples. It can automatically perform measurements and analysis of three basic blood parameters: white blood cell count, red blood cell count, and hemoglobin level. This instrument is typically utilized in medical laboratories, hospitals, clinics, and research institutions for assessing the blood condition of patients.

Product Advantage：

Fully automated operation
Rapid analysis
Accurate measurement
Measurement of multiple parameters
Sample processing capability
Data management functionality

Product Uses：

Medical laboratories, hospitals, clinics, and research institutions for assessing the blood condition of patients.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand

(pO2/pCO2/HCT/pH/K/Na/Cl/Ca/LAC/GLU)

Features

·Multi-specification reagent packs(50 tests/pack-1200 tests/pack): stored at room

temperature for 9 months, valid for up to 45 days on-board.

. Integrated flush solution pack to avoid biological pollution and without waste till used up.

.Automatic sample aspiration and sample needle cleaning, support capillary, arterial blood

syringe, test tube, etc.

.Sample analysis speed ~60s (with Lac/Glu <90s), blood volume for the whole

parameters <170ul.

. Built-in multi-level quality control rules, quality control charts, quality control data,

printable and exportable.

.Support bi-direction LIS, built-in WiFi,4G, and remote maintenance system.

. Built-in 2D barcode scanner and thermal printer, support external USB printer.

·Built-in UPS, optional trolley and external large-capacity UPS.

1. Who Are We?

We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.

2. How Can We Guarantee Quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3.What Can You Buy From Us?

CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.

4. Why Should You Buy From Us Not From Other Suppliers?

1.13 years medical equipment leading exporter

2.One-stop service

3.High quality assurance system

4.Best Professional after-sell service with branch in Nigeria and Madagascar

5.Factory price

5. What Services Can We Provide?

Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;

Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;

Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean

Product Description

Technical Parameters

FAQ

Portable Clinical Analyzer for Blood Gas and Chemistry Portable Blood Gas Analyzer

Product Category

Related Products

Related Blogs

Product Category

Product Category

Maya

Solutions