You are here: Home » Product Category » Patient Monitor » Patient Monitor » Medical Operation Room 12.1Inch Patient Monitor Multi-Parameter Multipara Patient Monitor With Etco2

Medical Operation Room 12.1Inch Patient Monitor Multi-Parameter Multipara Patient Monitor With Etco2

Share to:

Medical Operation Room 12.1Inch Patient Monitor Multi-Parameter Multipara Patient Monitor With Etco2

Features
Touch-screen for easy operation
11.6/13.3/15.6 inch high resolution colorTFT display
USB interfaces support easy software upgrade and data
transfer
Compatble with Central Monitoring System (CMS)
3/5/12-lead (Automatic 3/5/12-lead recognition)
Multi-display modes suitable for different applications:
Standard Interface, Large font, ECG Standard Full Display,
OXY,Trend Table
Built-in high capacity battery up to 4 hours of continuous work
Anti-electrosurgical interference
VGA output for extemal display
Technique Specification
ECG
Lead Mode: 3/5/12 Leads (I, l1, I1I, AVR,AVL,AVF,V)
Gain:2.5mm/mV, 5.0mm/mV,10mm/mV,20mm/mV
Heart Rate:15-300 BPM (Adult); 15-350 BPM(Neonatal)
Resolution:1 BPM
Accuracy:±1%
Sensitivity >200 uV(Peak to peak)
ST measurement range:-2.0~+2.0 mV
Accuracy:-0.8mV~+0.8mV: ±0.02mV or ±10%, which is
greater
Other Range: unspecified
Sweep speed: 12.5 mm/s,25mm/s,50mm/s
Bandwidth:
Diagnostic: 0.05~130 Hz
Monitor: 0.5~40Hz
Surgery:1~20 Hz

Availability:

Quantity:



Inquire Add to Basket

Model:
C004F-A

Medical Patient Monitor price multi-parameter patient monitor Multi-parameter monitor oem low price multi-paramet patient monitor Wall mounted Medical Patient Monitor

Product Description

Technical Parameters

FAQ

A patient monitor is a medical device used to monitor and record a patient's physiological parameters, such as heart rate, blood pressure, breathing, etc. To help the medical staff real-time monitoring the patient's health status, and timely take the necessary treatment measures.

Product Advantage:

Real-time monitoring;
Provide alerts;
Continuous monitoring;
Portability;
Data recording.

Product Uses:

It is commonly used in hospital emergency rooms, operating rooms, intensive care units and other places

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand

Features

Touch-screen for easy operation

11.6/13.3/15.6 inch high resolution colorTFT display

USB interfaces support easy software upgrade and data

transfer

Compatble with Central Monitoring System (CMS)

3/5/12-lead (Automatic 3/5/12-lead recognition)

Multi-display modes suitable for different applications:

Standard Interface, Large font, ECG Standard Full Display,

OXY,Trend Table

Built-in high capacity battery up to 4 hours of continuous work

Anti-electrosurgical interference

VGA output for extemal display

Technique Specification

ECG

Lead Mode: 3/5/12 Leads (I, l1, I1I, AVR,AVL,AVF,V)

Gain:2.5mm/mV, 5.0mm/mV,10mm/mV,20mm/mV

Heart Rate:15-300 BPM (Adult); 15-350 BPM(Neonatal)

Resolution:1 BPM

Accuracy:±1%

Sensitivity >200 uV(Peak to peak)

ST measurement range:-2.0~+2.0 mV

Accuracy:-0.8mV~+0.8mV: ±0.02mV or ±10%, which is

greater

Other Range: unspecified

Sweep speed: 12.5 mm/s,25mm/s,50mm/s

Bandwidth:

Diagnostic: 0.05~130 Hz

Monitor: 0.5~40Hz

Surgery:1~20 Hz

1. Who Are We?

We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.

2. How Can We Guarantee Quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3.What Can You Buy From Us?

CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.

4. Why Should You Buy From Us Not From Other Suppliers?

1.13 years medical equipment leading exporter

2.One-stop service

3.High quality assurance system

4.Best Professional after-sell service with branch in Nigeria and Madagascar

5.Factory price

5. What Services Can We Provide?

Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;

Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;

Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean

Product Description

Technical Parameters

FAQ

Medical Operation Room 12.1Inch Patient Monitor Multi-Parameter Multipara Patient Monitor With Etco2

Product Category

Related Products

Related Blogs

Product Category

Product Category

Maya

Solutions