You are here: Home » Product Category » Laboratory Machine » Auto Hematology Analyzer » 3-Part Hematology Analyzer Blood Testing Equipment Clinical Analytical Instruments for Blood Analysis System

3-Part Hematology Analyzer Blood Testing Equipment Clinical Analytical Instruments for Blood Analysis System

Share to:

3-Part Hematology Analyzer Blood Testing Equipment Clinical Analytical Instruments for Blood Analysis System

Throughput：
40 samples/hour
Principle：
Impedance for WBC, RBC,PLT
Cyanide-free method for HGB
Parameters：
24 parameters including:WBC, Neu#, Lym#,
Mid#, Neu%,Lym%, Mid%, RBC, HGB,HCT,
MCV, MCH, MCHC,RDW-SD, RDW-CV,PLT,
MPV, PDW-SD, PDW-CV,PCT,P-LCR,P-LCC,
NLR,PLR
Histograms：
3 histograms (WBC, RBC,PLT)
Sample volume：
Whole blood mode: 9μl
Capillary mode: 9μl
Prediluted mode: 20μl
Calibration：
Manual calibration, auto calibration,fresh blood calibration
Quality control：
3-level QC
L-JQC,X-B QC
Reagent：
Diluent: 20L,Lyse: 500ml
Probe cleanser:50ml
Print：
Auto print,manual print
Communication：
Support Bi-directional LIS
Language：
English, Spanish, Italian, French,Russian,Portuguese, Ukrainian, etc.
Input and output：
8 inch touch screen
Internal printer, support external printer
Interface：
USB port, Network port
Storage：
300,000 results with histograms
Blockage clear：
High voltage, high pres sure flush
Dimension：
430mm*280mm*400mm(D*W*H)
Net weight：
17.5kg
Workenvironment：
10-40C,10%-90%
100-240 AC,50/60Hz,160VA
70kPa-106.0kPa

Availability:

Quantity:



Inquire Add to Basket

Model:
MY-B003R

3-Part Hematology Analyzer hematology analyzer Blood Testing Equipment Clinical Analytical Instruments

Product Description

Technical Parameters

FAQ

The three-category fully automatic blood analyzer is a device used to analyze human blood samples. It can automatically perform measurements and analysis of three basic blood parameters: white blood cell count, red blood cell count, and hemoglobin level. This instrument is typically utilized in medical laboratories, hospitals, clinics, and research institutions for assessing the blood condition of patients.

Product Advantage：

Fully automated operation
Rapid analysis
Accurate measurement
Measurement of multiple parameters
Sample processing capability
Data management functionality

Product Uses：

Medical laboratories, hospitals, clinics, and research institutions for assessing the blood condition of patients.

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

Turn on the power switch
Check whether the air pressure is sufficient (must reach 0.6Mpa)
Click the host to start, and check whether each action is working properly
Check and clean up each box room
Put the bag, load the material, put the material box
Click the host to start
The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)
During the production process, check the product sealing and pumping conditions continuously
Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean
The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand

Throughput：

40 samples/hour

Principle：

Impedance for WBC, RBC,PLT

Cyanide-free method for HGB

Parameters：

24 parameters including:WBC, Neu#, Lym#,

Mid#, Neu%,Lym%, Mid%, RBC, HGB,HCT,

MCV, MCH, MCHC,RDW-SD, RDW-CV,PLT,

MPV, PDW-SD, PDW-CV,PCT,P-LCR,P-LCC,

NLR,PLR

Histograms：

3 histograms (WBC, RBC,PLT)

Sample volume：

Whole blood mode: 9μl

Capillary mode: 9μl

Prediluted mode: 20μl

Calibration：

Manual calibration, auto calibration,fresh blood calibration

Quality control：

3-level QC

L-JQC,X-B QC

Reagent：

Diluent: 20L,Lyse: 500ml

Probe cleanser:50ml

Print：

Auto print,manual print

Communication：

Support Bi-directional LIS

Language：

English, Spanish, Italian, French,Russian,Portuguese, Ukrainian, etc.

Input and output：

8 inch touch screen

Internal printer, support external printer

Interface：

USB port, Network port

Storage：

300,000 results with histograms

Blockage clear：

High voltage, high pres sure flush

Dimension：

430mm*280mm*400mm(D*W*H)

Net weight：

17.5kg

Workenvironment：

10-40C,10%-90%

100-240 AC,50/60Hz,160VA

70kPa-106.0kPa

1. Who Are We?

We are based in Guangzhou, China, start from 2011,sell to Mid East (31.00%), Africa(23.00%),South America(18.00%), North America(13.00%) ,Southeast Asia(12.00%),Oceania(1.00%), Western Europe (1.00%),Central America(1.00%). There are total about 11-50 people in our office.

2. How Can We Guarantee Quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment.

3.What Can You Buy From Us?

CT/MRI; Laboratory Equipment; Diagnostic Equipment; ICU Equipment; Theatre Equipment; Hemodialysis Equipment.

4. Why Should You Buy From Us Not From Other Suppliers?

1.13 years medical equipment leading exporter

2.One-stop service

3.High quality assurance system

4.Best Professional after-sell service with branch in Nigeria and Madagascar

5.Factory price

5. What Services Can We Provide?

Accepted Delivery Terms: FOB,CFR,CIF, EXW,FAS,CIP,FCA,DEQ;

Accepted Payment Currency: USD, EUR,CAD, AUD,CNY;

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card,PayPal, Western Union, Cash,Escrow;

Language Spoken:English, Chinese,Spanish, Japanese, Portuguese, German, Arabic, French,Korean

Product Description

Technical Parameters

FAQ

3-Part Hematology Analyzer Blood Testing Equipment Clinical Analytical Instruments for Blood Analysis System

Product Category

Related Products

Related Blogs

Product Category

Product Category

Maya

Solutions