15.6 Inch Touch Magnetic Resonance Patient Monitor Screen Cardiac MRI Monitor for Medical Patient Monitoring Hospital Use

A patient monitor is a medical device used to monitor and record a patient's physiological parameters, such as heart rate, blood pressure, breathing, etc. To help the medical staff real-time monitoring the patient's health status, and timely take the necessary treatment measures.

Product Advantage:

• Real-time monitoring;

• Provide alerts;

• Continuous monitoring;

• Portability;

• Data recording.

Product Uses:

It is commonly used in hospital emergency rooms, operating rooms, intensive care units and other places

Product Operate Guide：

The operation of the machine is not done once and for all, and it is necessary to pay special attention to the state of the machine during each packaging process. In order to effectively manage and maintain the packaging machine and control the product quality, in addition to regular maintenance, the auxiliary personnel and feeding personnel of the equipment also need to follow the following operating procedures.

Auxiliary personnel

• Turn on the power switch

• Check whether the air pressure is sufficient (must reach 0.6Mpa)

• Click the host to start, and check whether each action is working properly

• Check and clean up each box room

• Put the bag, load the material, put the material box

• Click the host to start

• The product that is packaged in vacuum for the first time should be checked whether the seal is firm, whether the suction is tight and through the water check(Must check vacuum chamber 1-10)

• During the production process, check the product sealing and pumping conditions continuously

• Every 2 hours after the machine runs, must be the top cover of the machine, bag clip, and funnel mouth, carried out with an air gun clean

• The bag or material dropped on the machine, should be hooked out with a hook, do not take it by hand